FERONIX Logo
Home / Products /FERONIX RUSTKLEEN

FERONIX / INDUSTRIAL SURFACE SOLUTIONS

FERONIX

RUSTKLEEN

Rust Remover Solution

Remove Rust. Prepare Metal. Protect Before Coating.

Effective Rust Removal
Removes Light Oil & Contaminants
Water-Based, Non-Toxic*
Temporary Rust Prevention
Ready to Use Solution
Suitable For Dipping & Swabbing
REQUEST A QUOTE DOWNLOAD TDS

ABOUT FERONIX RUSTKLEEN

FERONIX RUSTKLEEN is a high-performance rust remover solution specially designed to effectively remove rust, oxidation, and corrosion deposits from iron and steel surfaces. Its powerful formulation helps rust clean and rust dissolve from rust-affected metal, restoring the surface and preparing it for subsequent treatment, priming, or protective coating. FERONIX RUSTKLEEN is suitable for maintenance, restoration, fabrication, engineering, automotive, construction, and industrial applications where proper rust removal and metal surface preparation are essential. A water-based, ready-to-use rust remover and light-oil cleaner that leaves a temporary protective conversion film no additional rust preventive oil required. Advanced Rust Removal for Better Surface Preparation Rust can weaken metal surfaces and compromise the adhesion and performance of protective coatings. FERONIX RUSTKLEEN rust remover helps remove unwanted rust and oxidation, leaving the metal surface cleaner and better prepared for the next stage of protection. By effectively helping to rust clean and rust dissolve, it can be used as an important first step before applying FERONIX rust-converting, priming, or anti-corrosive coating systems.

WHY CHOOSE FERONIX RUSTKLEEN?

Effective Rust Removal

Helps remove rust and oxidation from metal surfaces.

Removes Light Oil

Removes light oil and contaminants for a cleaner surface.

Water-Based Formulation

Water-based, safe to use for controlled industrial processes.

Temporary Rust Prevention

Provides 60-90 days of temporary rust protection.

Ready to Use

No mixing required. Ready-to-use solution.

Dipping & Swabbing Application

Suitable for dipping and swabbing processes.

Before & After — the FERONIX RUSTKLEEN Effect

FERONIX RUSTKLEEN effectively removes rust, oxidation and light oil from metal surfaces and leaves the surface clean and ready for painting or coating.

Rusted Surface
Rusted Surface
FERONIX RUSTKLEEN Treatment
FERONIX RUSTKLEEN Treatment
Clean & Prepared Surface
Clean & Prepared Surface

How It Works

1
Inspect
Identify rust, oxidation, light oil and other contaminants.
2
Apply
Apply FERONIX RUSTKLEEN by dipping or swabbing on metal surfaces.
3
Rust Removal
Solution works on rust and contaminants to loosen and remove them.
4
Clean / Prepare
Rinse or wipe as per process requirements and allow to drain.
5
Protect
Provides temporary rust protection during storage and handling.
6
Coat
Apply FERONIX primer or coating for long-term protection.

Technical Specifications

Product TypeRust Remover & Rust Preventive Solution
AppearanceClear / Colourless Liquid
BaseWater-Based
FormReady to Use
pH2 - 4 at 27°C
ViscosityApprox. 12 sec at 27°C
DensityApprox. 1.10 g/cc
Film ThicknessApprox. 0.08 micron
FlammabilityNon-Flammable
Rust RemovalYes
Light Oil RemovalYes
Temporary Protection60 - 90 Days*
ApplicationDipping / Swabbing
CoverageApprox. 150 - 200 sq. ft./L
Application EquipmentPlastic Bath / Plastic Bucket
Recommended ContainerPlastic
Available Pack Sizes5 L / 20 L

*Actual protection period depends on storage conditions, humidity, temperature and handling.

Wide Range of Industrial Applications

Automobile Components
Automobile Components
Cast Iron Components
Cast Iron Components
Mild Steel Surfaces
Mild Steel Surfaces
Stainless Steel Components
Stainless Steel Components
Cold Rolled Sheets
Cold Rolled Sheets
Fabrication Works
Fabrication Works
Powder Coating Preparation
Powder Coating Preparation
VIEW ALL APPLICATIONS

Application Method

Dipping Process

Immerse components completely in FERONIX RUSTKLEEN solution for effective rust removal. Allow to drain thoroughly.

Swabbing Process

Apply FERONIX RUSTKLEEN using a swab/brush on the surface. Allow to react and wipe/rinse as required.

Use plastic bath or plastic bucket only. Do not use MS container for the treatment.

Industries We Serve

Automotive Industry
Fabrication Industry
Engineering Industry
Manufacturing Industry
Powder Coating Industry
Marine Industry
Infrastructure & Maintenance

FREQUENTLY ASKED QUESTIONS

RUSTKLEEN removes rust, oxidation and light oil from metal surfaces to prepare them for painting, coating or powder coating.
Yes, it is a water-based, ready-to-use rust remover and rust preventive solution.
Yes, RUSTKLEEN also removes light oil and surface contaminants along with rust and oxidation.
RUSTKLEEN provides approximately 60-90 days of temporary rust protection depending on storage conditions.
Yes, RUSTKLEEN is suitable for stainless steel, mild steel, cast iron and cold rolled components.
RUSTKLEEN can be applied by dipping components fully into the solution or by swabbing it onto the surface.
Yes, RUSTKLEEN is commonly used as a preparation step before powder coating to ensure a clean, rust-free surface.
Use a plastic bath or plastic bucket only. Do not use an MS (mild steel) container for the treatment.

START WITH A CLEAN SURFACE. BUILD LASTING PROTECTION.

Choose FERONIX RUSTKLEEN for effective rust removal and temporary protection of metal surfaces.

REQUEST A QUOTE